Elastin-like Peptide as a Model for Disordered Proteins: Diffusion Behaviour in Self-Crowding Conditions.

Despite the current high interest, there is limited information on diffusion data for intrinsically disordered proteins (IDPs). This study investigates the effect of crowding on the diffusion behaviour of an elastin-like peptide (ELP), by combined pulse field gradient (PFG) and static field gradient (SFG) NMR techniques. We interpret our findings in terms of highly dynamic chain assemblies with weak interactions, resulting in ELP diffusion that is primarily governed by the viscous flow of the solvent. The diffusion behaviour of the peptide appears to resemble that of globular proteins rather than flexible linear polymers over a wide concentration range.

The Colloidal Stability of Apolar Nanoparticles in Solvent Mixtures.

Solvent engineering is a powerful and versatile method to tune colloidal stability. Here, we link the molecular structure of apolar ligand shells on gold nanoparticles with their colloidal stability in solvent mixtures. The agglomeration temperature of the particles was measured with small-angle X-ray scattering. It depended on solvent composition and changed linearly for hexane-hexadecane mixtures, but nonlinearly for cyclohexane-hexadecane and hexanol-hexadecane mixtures. Molecular dynamics (MD) simulations indicate that agglomeration is dominated by temperature-dependent ligand order in the alkane mixtures and that the temperature at which the ligand shell orders depends on the solvent composition near the ligands, which can differ substantially from the bulk composition. Small-angle neutron scattering confirmed that, at intermediate solvent compositions above the agglomeration temperature, the fraction of cyclohexane near the ligands was larger than in the bulk. The enrichment of cyclohexane near the ligands stabilized their disordered state, which, consequently, led to the experimentally observed nonlinear trend of the agglomeration temperature. In contrast, hexanol was depleted from the ligand shell at all temperatures. This again stabilized the disordered state. Furthermore, we found that agglomeration at high hexanol fractions was driven by a solvophobic effect that exceeded the influence of ligand order. The results show that strong nonlinearities in the colloidal stability of nanoparticle dispersions in solvent mixtures are directly linked to the molecular details of ligand-solvent and solvent-solvent interactions, which can be used to precisely tune stability.

Anion and ether group influence in protic guanidinium ionic liquids.

Ionic liquids are attractive liquid materials for many advanced applications. For targeted design, in-depth knowledge about their structure-property-relations is urgently needed. We prepared a set of novel protic ionic liquids (PILs) with a guanidinium cation with either an ether or alkyl side chain and different anions. While being a promising cation class, the available data is insufficient to guide design. We measured thermal and transport properties, nuclear magnetic resonance (NMR) spectra as well as liquid and crystalline structures supported by ab initio computations and were able to obtain a detailed insight into the influence of the anion and the ether substitution on the physical and spectroscopic properties. For the PILs, hydrogen bonding is the main interaction between cation and anion and the H-bond strength is inversely related to the proton affinity of the constituting acid and correlated to the increase of 1H and 15N chemical shifts. Using anions from acids with lower proton affinity leads to proton localization on the cation as evident from NMR spectra and self-diffusion coefficients. In contrast, proton exchange was evident in ionic liquids with triflate and trifluoroacetate anions. Using imide-type anions and ether side groups decreases glass transitions as well as fragility, and accelerated dynamics significantly. In case of the ether guanidinium ionic liquids, the conformation of the side chain adopts a curled structure as the result of dispersion interactions, while the alkyl chains prefer a linear arrangement.

Microgravity Removes Reaction Limits from Nonpolar Nanoparticle Agglomeration.

Gravity can affect the agglomeration of nanoparticles by changing convection and sedimentation. The temperature-induced agglomeration of hexadecanethiol-capped gold nanoparticles in microgravity (µ g) is studied at the ZARM (Center of Applied Space Technology and Microgravity) drop tower and compared to their agglomeration on the ground (1 g). Nonpolar nanoparticles with a hydrodynamic diameter of 13 nm are dispersed in tetradecane, rapidly cooled from 70 to 10 °C to induce agglomeration, and observed by dynamic light scattering at a time resolution of 1 s. The mean hydrodynamic diameters of the agglomerates formed after 8 s in microgravity are 3 times (for low initial concentrations) to 5 times (at high initial concentrations) larger than on the ground. The observations are consistent with an agglomeration process that is closer to the reaction limit on thground and closer to the diffusion limit in microgravity.

Nanoscale Faceting and Ligand Shell Structure Dominate the Self-Assembly of Nonpolar Nanoparticles into Superlattices.

Self-assembly of nanoscale structures at liquid-solid interfaces occurs in a broad range of industrial processes and is found in various phenomena in nature. Conventional theory assumes spherical particles and homogeneous surfaces, but that model is oversimplified, and nanoscale in situ observations are needed for a more complete understanding. Liquid-phase scanning transmission electron microscopy (LP-STEM) is used to examine the interactions that direct the self-assembly of superlattices formed by gold nanoparticles (AuNPs) in nonpolar liquids. Varying the molecular coating of the substrate modulates short-range attraction and leads to switching between a range of different geometric structures, including hexagonal close-packed (hcp), simple hexagonal (sh), dodecahedral quasi-crystal (dqc), and body-centered cubic (bcc) lattices, as well as random distributions. Langevin dynamics simulations explain the experimental results in terms of the interplay between nanoparticle faceting, ligand shell structure, and substrate-NP interactions.

Percolation of rigid fractal carbon black aggregates.

We examine network formation and percolation of carbon black by means of Monte Carlo simulations and experiments. In the simulation, we model carbon black by rigid aggregates of impenetrable spheres, which we obtain by diffusion-limited aggregation. To determine the input parameters for the simulation, we experimentally characterize the micro-structure and size distribution of carbon black aggregates. We then simulate suspensions of aggregates and determine the percolation threshold as a function of the aggregate size distribution. We observe a quasi-universal relation between the percolation threshold and a weighted average radius of gyration of the aggregate ensemble. Higher order moments of the size distribution do not have an effect on the percolation threshold. We conclude further that the concentration of large carbon black aggregates has a stronger influence on the percolation threshold than the concentration of small aggregates. In the experiment, we disperse the carbon black in a polymer matrix and measure the conductivity of the composite. We successfully test the hypotheses drawn from simulation by comparing composites prepared with the same type of carbon black before and after ball milling, i.e., on changing only the distribution of aggregate sizes in the composites.

Curled cation structures accelerate the dynamics of ionic liquids.

Ionic liquids are modern liquid materials with potential and actual implementation in many advanced technologies. They combine many favourable and modifiable properties but have a major inherent drawback compared to molecular liquids - slower dynamics. In previous studies we found that the dynamics of ionic liquids are significantly accelerated by the introduction of multiple ether side chains into the cations. However, the origin of the improved transport properties, whether as a result of the altered cation conformation or due to the absence of nanostructuring within the liquid as a result of the higher polarity of the ether chains, remained to be clarified. Therefore, we prepared two novel sets of methylammonium based ionic liquids; one set with three ether substituents and another set with three butyl side chains, in order to compare their dynamic properties and liquid structures. Using a range of anions, we show that the dynamics of the ether-substituted cations are systematically and distinctly accelerated. Liquefaction temperatures are lowered and fragilities increased, while at the same time cation-anion distances are slightly larger for the alkylated samples. Furthermore, pronounced liquid nanostructures were not observed. Molecular dynamics simulations demonstrate that the origin of the altered properties of the ether substituted ionic liquids is primarily due to a curled ether chain conformation, in contrast to the alkylated cations where the alkyl chains retain a linear conformation. Thus, the observed structure-property relations can be explained by changes in the geometric shape of the cations, rather than by the absence of a liquid nanostructure. Application of quantum chemical calculations to a simplified model system revealed that intramolecular hydrogen-bonding is responsible for approximately half of the stabilisation of the curled ether-cations, whereas the other half stems from non-specific long-range interactions. These findings give more detailed insights into the structure-property relations of ionic liquids and will guide the development of ionic liquids that do not suffer from slow dynamics.

Hybrid Dielectric Films of Inkjet-Printable Core-Shell Nanoparticles.

A new type of hybrid core-shell nanoparticle dielectric that is suitable for inkjet printing is introduced. Gold cores (dcore  ≈ 4.5 nm diameter) are covalently grafted with thiol-terminated polystyrene (Mn  = 11000 Da and Mn  = 5000 Da) and used as inks to spin-coat and inkjet-print dielectric films. The dielectric layers have metal volume fractions of 5 to 21 vol% with either random or face-centered-cubic structures depending on the polymer length and grafting density. Films with 21 vol% metal have dielectric constants of 50@1 Hz. Structural and electrical characterization using transmission electron microscopy, small-angle X-ray scattering, and impedance spectroscopy indicates that classical random capacitor-resistor network models partially describe this hybrid material but fail at high metal fractions, where the covalently attached shell prevents percolation and ensures high dielectric constants without the risk of dielectric breakdown. A comparison of disordered to ordered films indicates that the network structure affects dielectric properties less than the metal content. The applicability of the new dielectric material is demonstrated by formulating inkjet inks and printing devices. An inkjet-printed capacitor with an area of 0.79 mm2 and a 17 nm thick dielectric had a capacitance of 2.2 ± 0.1 n F @ 1 k H z .

In situ investigation of temperature induced agglomeration in non-polar magnetic nanoparticle dispersions by small angle X-ray scattering.

Non-polar magnetic nanoparticles agglomerate upon cooling. This process is followed by in situ small angle X-ray scattering to assess structural properties of the emerging agglomerates. On the length scale of a few particle diameters, no differences are found between the agglomerates of small (d = 12 nm) and large (d = 22 nm) nanoparticles. Hard-sphere like random packing with a local packing fraction of η = 0.4 is seen. On larger length scales, small particles form compact superstructures, while large particles arrange into agglomerates that resemble chain-like structures in SAXS. This can be explained by directed magnetic dipole interactions that dominate larger particles, while isotropic van der Waals interaction governs the agglomeration of smaller particles.

Reversible magnetism switching of iron oxide nanoparticle dispersions by controlled agglomeration.

The controlled agglomeration of superparamagnetic iron oxide nanoparticles (SPIONs) was used to rapidly switch their magnetic properties. Small-angle X-ray scattering (SAXS) and dynamic light scattering showed that tailored iron oxide nanoparticles with phase-changing organic ligand shells agglomerate at temperatures between 5 °C and 20 °C. We observed the concurrent change in magnetic properties using magnetic particle spectroscopy (MPS) with a temporal resolution on the order of seconds and found reversible switching of magnetic properties of SPIONs by changing their agglomeration state. The non-linear correlation between magnetization amplitude from MPS and agglomeration degree from SAXS data indicated that the agglomerates' size distribution affected magnetic properties.

Temperature Variation Enables the Design of Biobased Block Copolymers via One-Step Anionic Copolymerization.

A one-pot approach for the preparation of diblock copolymers consisting of polystyrene and polymyrcene blocks is described via a temperature-induced block copolymer (BCP) formation strategy. A monomer mixture of styrene and myrcene is employed. The unreactive nature of myrcene in a polar solvent (tetrahydrofuran) at -78 °C enables the sole formation of active polystyrene macroinitiators, while an increase of the temperature (-38 °C to room temperature) leads to poly(styrene-block-myrcene) formation due to polymerization of myrcene. Well-defined BCPs featuring molar masses in the range of 44-117.2 kg mol-1 with dispersities, Ð, of 1.09-1.21, and polymyrcene volume fractions of 30-64% are accessible. Matrix assisted laser desorption ionization-time of flight mass spectrometry measurements reveal the temperature-controlled polymyrcene block formation, while both transmission electron microscopy and small-angle X-ray scattering measurements prove the presence of clearly microphase-separated, long range-ordered domains in the block copolymers. The temperature-controlled one-pot anionic block copolymerization approach may be general for other terpene-diene monomers.

X-ray scattering study on the crystalline and semi-crystalline structure of water/PEG mixtures in their eutectic phase diagram.

Mixtures of water and PEG exhibit a well known eutectic phase diagram. While the thermodynamic properties like eutectic and liquidus temperatures as well as the eutectic concentration are intensely investigated almost nothing is known about the structural properties of water and PEG in the different regions of the phase diagram. Therefore, we report on a combined DSC, SAXS and WAXS study over the full range of polymer water compositions in order to elucidate the crystalline and semi-crystalline structure. Throughout the whole phase diagram no signatures of a mixed-crystalline phase of PEG and water can be found. Below the eutectic temperature, both components demix microscopically into hexagonal ice and crystalline PEG with its well known crystalline structure. In the region between eutectic and liquidus temperature, the solid component is composed of a single phase of either pure semi-crystalline PEG (PEG rich side of the phase diagram) or pure ice (water rich side). The semi-crystalline structure of PEG, in contrast, is changed by the presence of water. Its long spacing dac increases due to the incorporation of water molecules in the amorphous regions, while the formation of crystalline regions seems to be enhanced, resulting in an almost unaffected crystallinity.

Ether functionalisation, ion conformation and the optimisation of macroscopic properties in ionic liquids.

Ionic liquids are an attractive material class due to their wide liquid range, intrinsic ionic conductivity, and high chemical as well as electrochemical stability. However, the widespread use of ionic liquids is hindered by significantly higher viscosities compared to conventional molecular solvents. In this work, we show how the transport properties of ionic liquids can be altered significantly, even for isostructural ions that have the same backbone. To this end, structure-property relationships have been determined for a set of 16 systematically varied representative ionic liquids. Variations in molecular structure include ammonium vs. phosphonium, ether vs. alkyl side chains, and rigid vs. flexible anions. Ab initio calculations are used to relate molecular structures to the thermal, structural and transport properties of the ionic liquids. We find that the differences in properties of ether and alkyl functionalised ionic liquids are primarily dependent on minimum energy geometries, with the conformational flexibility of ether side chains appearing to be of secondary importance. We also show unprecedented correlations between anion conformational flexibility and transport properties. Critically, increasing fluidity upon consecutive introduction of ether side chains and phosphonium centres into the cation is found to be dependent on whether the anion is flexible or rigid. We demonstrate that targeted design of functional groups based on structure-property relationships can yield ionic liquids of exceptionally high fluidity.

Disentangling of complex polymer dynamics under soft nanoscopic confinement.

We discuss the complex interplay between host and guest dynamics for a polymer in soft confinement by a droplet-phase microemulsion. Intermediate scattering functions obtained by neutron spin echo spectroscopy are first analysed by means of an effective diffusion coefficient. From its dependence on the absolute of the scattering vector q we concluded a sophisticated model for the systems dynamics taking both polymer and microemulsion contributions into account. Global fitting of this model to the intermediate scattering functions at all measured q-values and all investigated confinement sizes eventually allows for a precise disentangling of the pure polymer dynamics in confinement from the overlaying microemulsion dynamics. Validity of our approach is further supported by numerical random walk calculations.

Structural Properties and Magnetic Ordering in 2D Polymer Nanocomposites: Existence of Long Magnetic Dipolar Chains in Zero Field.

The existence of magnetic dipolar nanoparticle chains at zero field has been predicted theoretically for decades, but these structures are rarely observed experimentally. A prerequisite is a permanent magnetic moment on the particles forming the chain. Here we report on the observation of magnetic dipolar chains of spherical iron oxide nanoparticles with a diameter of 12.8 nm. The nanoparticles are embedded in an ultrathin polymer film. Due to the high viscosity of the polymer matrix, the dominating aggregation mechanism is driven by dipolar interactions. Smaller iron oxide nanoparticles (8 nm) show no permanent magnetic moment and do not form chains but compact aggregates. Mixed monolayers of iron oxide nanoparticles and polymer at the air-water interface are characterized by Langmuir isotherms and in situ X-ray reflectometry (XRR). The combination of the particles with a polymer leads to a stable polymer nanocomposite film at the air-water interface. XRR experiments show that nanoparticles are immersed in a thin polymer matrix of 2 nm. Using atomic force microscopy (AFM) on Langmuir-Blodgett films, we measure the lateral distribution of particles in the film. An analysis of single structures within transferred films results in fractal dimensions that are in excellent agreement with 2D simulations.

Temperature induced conformational changes in the elastin-like peptide GVG(VPGVG)3.

Elastin-like peptides are biopolymers that display LCST behaviour in solution quite similar to other synthetic polymers like polyethylene oxide. Here we study the structure of the peptide GVG(VPGVG)3 in a temperature range of 25 °C to 70 °C with small angle neutron scattering. The LCST for this peptide is outside the experimental range of temperatures. Molecular conformation is well described within the model of a random coil but increasing temperature leads to significant changes. The peptide displays a combination of conformational change and aggregation that show up in the scattering at low and intermediate scattering vector q. The aggregate size is determined from an integral measure of the scattered intensity. It increases with temperature and concentration. For low concentration we find a size variation with temperature that may be related to the collapse of conformation at the inverse temperature transition (ITT).

Oriented crystallization of PEG induced by confinement in cylindrical nanopores: structural and thermal properties.

Nanoporous ion track-etched polycarbonate is ideally suited for the study of confined polymers via small angle X-ray scattering (SAXS) due to the strictly parallel orientation of the pores as well as their uncorrelated lateral distribution. Nanopores with radii ranging from 17 to 213 nm are prepared and coated with SiO2via atomic layer deposition in order to obtain a well-defined and homogeneous surface. A low molecular weight polyethylene glycol (PEG) homopolymer with a semicrystalline lamellar bulk structure is introduced into the nanopores via melt infiltration. At high temperatures SAXS measurements confirm a uniform filling of the pores with amorphous polymer. Upon cooling below the melting point of PEG, a concentrical structure of semicrystalline lamellae is revealed for large pore radii. We introduce models which successfully describe the combined scattering from nanopores and semicrystalline or amorphous PEG inside. DSC measurements of the confined polymer show a decrease of melting temperature and heat of fusion per gram polymer upon reduction of the pore radius and hint at a change in the lamellar configuration.

Metallopolymer-Based Block Copolymers for the Preparation of Porous and Redox-Responsive Materials.

Metallopolymers are a unique class of functional materials because of their redox-mediated optoelectronic and catalytic switching capabilities and, as recently shown, their outstanding structure formation and separation capabilities. Within the present study, (tri)block copolymers of poly(isoprene) (PI) and poly(ferrocenylmethyl methacrylate) having different block compositions and overall molar masses up to 328 kg mol-1 are synthesized by anionic polymerization. The composition and thermal properties of the metallopolymers are investigated by state-of-the-art polymer analytical methods comprising size exclusion chromatography, 1H NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. As a focus of this work, excellent microphase separation of the synthesized (tri)block copolymers is proven by transmission electron microscopy, scanning electron microcopy, energy-dispersive X-ray spectroscopy, small-angle X-ray scattering measurements showing spherical, cylindrical, and lamellae morphologies. As a highlight, the PI domains are subjected to ozonolysis for selective domain removal while maintaining the block copolymer morphology. In addition, the novel metalloblock copolymers can undergo microphase separation on cellulose-based substrates, again preserving the domain order after ozonolysis. The resulting nanoporous structures reveal an intriguing switching capability after oxidation, which is of interest for controlling the size and polarity of the nanoporous architecture.

Polymer conformation in nanoscopic soft confinement.

We study the conformation of a polymer (polyethylene glycol) in a nanoscopic soft confinement with attractive walls. The polymer is added to a water-in-oil microemulsion based on the deuterated anionic surfactant AOT, d-octane and D2O. Three different droplet sizes and up to three polymers per droplet are investigated with small angle scattering combining X-rays and neutrons. This allows determining the confinement size and polymer conformation on identical samples. Whereas polymer conformation in bulk is found to be well described with the model of a Gaussian coil its radius of gyration is drastically increased in the droplet. At the same time it is compressed on a local scale. This supports the picture of a polymer strongly adsorbed on the surfactant layer with a thickness of several Angstroms.

Changes in the bending modulus of AOT based microemulsions induced by the incorporation of polymers in the water core.

The bending modulus κ is known to be a crucial parameter for the stability of the droplet phase in microemulsion systems. For AOT based water in oil microemulsions the bending modulus of the surfactant has values close to kBT but can be influenced by the presence of polymers. In this work we focus on the water soluble polymer polyethylene glycol and how it influences the bending modulus. An increase by a factor of three is found. For the correct evaluation of the bending modulus via percolation temperatures and droplet radii, thus by dielectric spectroscopy and small angle X-ray scattering, the determination of the radii right at the percolation temperature is crucial as we will show, although it is often neglected. In order to precisely determine the droplet radii we will present a global fitting model which provides reliable results with a minimum number of free fitting parameters.